Search in Brand
Thomson Linear
Filter Your Search
Category Group
Categories
Loading...
Thomson Linear Products
The Thomson brand is recognized and trusted as the global leader in mechanical motion technology, having invented anti-friction linear technology they continue to lead the industry.
Searching for: thomson-linear
Viewing Page 1 of 987
(9,867 results)
PPA00-01B65-12NXXX Thomson Actuator
Item #:
PPA00-01B65-12NXXX
Thomson PPA00-01B65-12NXXX Actuator, PPA, No Motor, 1500 lbf, 12 in Nominal Stroke, No Feedback, 0.33 in/s Travel Rate @ Full Load; Actuator with double input shafts to which a customer supplied motor or/and an intermediate shaft can be mounted; Highly efficient ball screw drive system; Holding brake prevents back driving; Trunnion to clevis mounting; Maintenance free
Manufacturer: Thomson Linear
DT060-040-0-RM060-316 Thomson 40:1 DuraTRUE Size 60 Gearhead
Item #:
DT060-040-0-RM060-316
Thomson DT060-040-0-RM060-316 DuraTRUE Size 60 Gearhead
Manufacturer: Thomson Linear
UT006-040-0-RM060-6 Thomson UltraTRUE Gearhead 60 mm
Item #:
UT006-040-0-RM060-6
Thomson UT006-040-0-RM060-6 UltraTRUE Gearhead 60 mm, Peak Torque (Nm): 114 Nm, Backlash: 5 arc-minutes, Gearing: Helical Crowned
Manufacturer: Thomson Linear
DCG14-1H Thomson Actuator-Control
Item #:
DCG14-1H
Thomson DCG14-1H Actuator, HAND PENDANT FOR DCG CONTROL; Handy and light weight control pendant with spiral cord cable which connects to the DCG input with a plug; Cable length 59 in
Manufacturer: Thomson Linear
VT115-035-0-RM100-71 Thomson Gearhead w/ RediMount
Item #:
VT115-035-0-RM100-71
Thomson VT115-035-0-RM100-71 Gearhead w/ RediMount; In-line, Frame Size 115, Ratio 35:1, Max Backlash (arc-min) 5, Rated Torque (in-lb) 2033, Peak Torque (in-lb) 4549, Torsional Stiffness (in-lb/arc-min) 167
Manufacturer: Thomson Linear
Supplier Part #: 30565912
NSK GRS LGU Thomson Ball Screw-Grease
Item #:
NSK GRS LGU
Thomson NSK GRS LGU CLEANROOM GREASE, ; Ball and Lead screws must be lubricated to operate properly and achieve the rated life.; The TriGEL grease can be applied directly tothe screw threads near the root of the ball track.; Screws may require lubrication frequently depending on both environmental and operating conditions. If the lubricant appears to be dispersed before this point or has become dry or crusted, the maintenance interval should be more frequent; Before adding additional grease, wipe the screw clean, removing the old grease and any particulate contamination seen on the screw
Manufacturer: Thomson Linear
NSK#1 Thomson Ball Screw-Grease
Item #:
NSK#1
Thomson NSK#1 BALL SCREW GREASE 80 GRM (LR3), ; Ball and Lead screws must be lubricated to operate properly and achieve the rated life.; The TriGEL grease can be applied directly tothe screw threads near the root of the ball track.; Screws may require lubrication frequently depending on both environmental and operating conditions. If the lubricant appears to be dispersed before this point or has become dry or crusted, the maintenance interval should be more frequent; Before adding additional grease, wipe the screw clean, removing the old grease and any particulate contamination seen on the screw
Manufacturer: Thomson Linear
NSK#2 Thomson Ball Screw-Grease
Item #:
NSK#2
Thomson NSK#2 ACME SCREW GREASE 80 GRAM, ; Ball and Lead screws must be lubricated to operate properly and achieve the rated life.; The TriGEL grease can be applied directly tothe screw threads near the root of the ball track.; Screws may require lubrication frequently depending on both environmental and operating conditions. If the lubricant appears to be dispersed before this point or has become dry or crusted, the maintenance interval should be more frequent; Before adding additional grease, wipe the screw clean, removing the old grease and any particulate contamination seen on the screw
Manufacturer: Thomson Linear
NSKLG#2 Thomson Ball Screw-Grease
Item #:
NSKLG#2
Thomson NSKLG#2 NSK CLEAN ROOM GREASE 80 GRAM, ; Ball and Lead screws must be lubricated to operate properly and achieve the rated life.; The TriGEL grease can be applied directly tothe screw threads near the root of the ball track.; Screws may require lubrication frequently depending on both environmental and operating conditions. If the lubricant appears to be dispersed before this point or has become dry or crusted, the maintenance interval should be more frequent; Before adding additional grease, wipe the screw clean, removing the old grease and any particulate contamination seen on the screw
Manufacturer: Thomson Linear
Don't see what you need?
Click here to let us know and we'll help you find what you're looking for.The following web pages were found that match your search
TSI Solutions has been a distributor of industrial automation and motion control components for over 40 years. We proudly offer a full-range of products...
More